I know i'm in the minority, but I had a lousy experience recently when I took my car in for brake work. When I got it home there was brake fluid leaking out of the left front wheel. I found that the brake hose was not fully screwed in to the wheel cylinder. As a result, the threaded metal end of the brake hose had been bent against the hub, and had cracked. Also, the copper washer was missing. I pulled the wheel off of the other side, which was ok. I then got worried about the rear brakes, so I pulled the drums to find that the rear drums were not turned. Also, they had installed the springs on the rear shoes incorrectly so that they did not contact the brake adjustment mechanism, meaning the brakes would never stay in adjustment. This was not the only problem I had, but was the one that was the most severe, because it could have resulted in an accident. By the time I discovered the leak I was already burned out from talking with Tony and Anthony and their lousy attitudes that I decided to vent here and maybe help out somebody else. Be careful with these guys!!!!